Features:
1. The machine has a compact design, a small floor space, and casters at the bottom for easy movement.
2. The blade is made of imported SKD-11 material.
3. Easy disassembly and assembly design, saving time and effort for maintenance.
4. The stainless steel double-layer feeding nozzle does not pollute the raw materials and can effectively reduce the noise generated during crushing.
5. Equipped with electric control safety protection device to ensure safe operation.
Electrical Control:
MM machine edge crushing series, suitable for injection molding machine, with the machine edge, recycling device, dryer, etc. to form a set of rapid recovery system. This system can eliminate the complicated intermediate links in the recycling process, greatly avoiding the secondary pollution and waste of manpower, materials, and achieving the best recycling effect. It is widely used for on-site crushing and recycling of injection molding machine side nozzle materials and a small amount of defective products.
Recycle the scene immediately | Recycle the factory immediately |
Model | Smash caliber | Crushing ability | Rotating speed | Fixed knife | Rotary knife | Power KW | Dimensions | Weight | |
Smash | Recycle | ||||||||
MM-180 | 190*160 | 40-70 | 330 | 2 | 9 | 1.1-6 | 0.55 | 490*800*1200 | 180 |
MM-250 | 260*220 | 60-100 | 300 | 2 | 15 | 1.5-6 | 0.75 | 550**960*1320 | 300 |
MM-300 | 320*220 | 80-150 | 300 | 2 | 9 | 2.2-6 | 0.75 | 600*960*1320 | 350 |
Equipped with special receiving barrel for suction machine, add "A" after the model
Equipped with immediate recovery device, add "AS" after the model
Machine voltage 3 phase/380V/50HZ